User Manual

219
────────────────────────────────────────────────────
9.7 Scaling Function (SYSTEM2)
────────────────────────────────────────────────────
Setting the scaling function
Setting the variable function
・Convert the measurement to a physical
quantity.
・Set the unit (eu).
・Set the upper and lower limits of variable
setting using the converted (scaled) physical
quantity.
・Set the unit (eu) on the scaling setup screen
.
(1) The gauge unit indication [ ] is
widened (when the gauge is set to ON
).
[V]
50
45
40
35
[VVVVVVVV]
50
45
40
35
(2) The input channel is represented in full-span mode instead of
full-scale mode, and the unit is displayed in [ ].
ＣＨ１■ 100mV fs ( 5mV ×1)
ＣＨ１■ -50 ∼ 50 [mV ]
【 Scaling OFF 】
【 Scaling ON 】
【 Scaling OFF 】
【 Scaling ON 】
■ Combination of the scaling and variable functions
The scaling function can be combined with the variable function. If both the
scaling and variable functions are to be used in the order of "Variable" →
"Scaling," it is necessary to use the previously converted physical quantity
(after scaling) to set the upper and lower limits of variable setting .
■ How to identify scaled data output