User Manual

217
────────────────────────────────────────────────────
9.7 Scaling Function (SYSTEM2)
────────────────────────────────────────────────────
Move the flashing cursor to the desired
channel.
Move the flashing cursor to each digit and
use the JOG control, the function keys or
the CH&NUM key to enter individual
digits.
(Use the cursor keys to move the column.)
Conversion ratio method
The setting range for both these items is
-9.9999E+9 to +9.9999E+9.
2-point method
The setting range is -9.9999E+29 to
+9.9999E+29.
：Value up
：Value down
Selection
Selection
Using the function key and the JOG contro
l
：Enter the value using the CH&NUM
keys.
：Reset (when specified at conversion
ratio method)
(3) Entering the numerical value
Flashing curso
r