User Manual

209
────────────────────────────────────────────────────
9.5 Zero Setting
────────────────────────────────────────────────────
9
.5.2 Zero Offset
Screen: CHANNEL1, DISPLAY
Call up the CHANNEL1 or DISPLAY
screen.
Move the flashing cursor to the
zero pos. item.
Press the F5 [ 0 Setting ].
Method
Method
Flashing curso
r
Use the function keys to make the
selection.
：Displays the Zero Offset and Zero
Adjust setup screen.
Selection
Selection
Selection
Selection
：Activates zero offset on all
channels.
：Activates zero offset on specified
channels.
：Disables zero offset on specified
channels.
：Exits Zero setup.
：Performs zero adjustment.
Disables zero offset on all channels
.
This function offsets the input voltage measurement to 0 V to compensate for
an actual non-zero input voltage. If the actual input voltage exceeds ±10
DIVs, zero offset cannot be performed. This function is for the voltage and
current measurement only.
The zero offset is active when power is off, but if the input unit configuration
is changed while power is on, the zero offset must be reset.