User Manual

206
────────────────────────────────────────────────────
9.3 Setting the CHANNEL1 Screen
────────────────────────────────────────────────────
Move the flashing cursor to the "1, 2, 3, 4"
item of the channel for which the display
color is to be set, as shown in the figure on
the left.
Use the the function keys to make the
selection.
：Move the arrow up in the selection
window.
：Move the arrow down in the
selection window.
Selection
Selection
：Waveform display is enabled.
：Waveform display is disabled.
Flashing curso
r