User Manual

200
────────────────────────────────────────────────────
9.3 Setting the CHANNEL1 Screen
────────────────────────────────────────────────────
9
.3.4 Setting the Input Coupling
Screen: CHANNEL1, DISPLAY
Call up the CHANNEL1 or DISPLAY
screen.
Use the CH.SET key to display the desired
channel screen.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
Method
Method
：DC coupling
：AC coupling
Selection
Selection
：The input signal is not connected.
This allows the zero position to be
checked.
Flashing curso
r
The input coupling for the input signal is set.