User Manual

198
────────────────────────────────────────────────────
9.3 Setting the CHANNEL1 Screen
────────────────────────────────────────────────────
9
.3.2 Setting the Waveform Display Graph Position
Screen: CHANNEL1, DISPLAY
Call up the CHANNEL1 or DISPLAY
screen.
Use the CH.SET key to display the desired
channel screen.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
：Display the waveform on graph 1.
：Display the waveform on graph 2.
Selection
Selection
Method
Method
：Display the waveform on graph 3.
：Display the waveform on graph 4.
Flashing curso
r
NOTE
Set which graph type to use when display format has been set to DUAL,
QUAD, OCT or HEX screen display on the STATUS screen.
For the X-Y screen display format (memory recorder, recorder), refer to the X-
Y recorder settings of each function.