User Manual

197
────────────────────────────────────────────────────
9.3 Setting the CHANNEL1 Screen
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
9
.3.1 Setting the Waveform Display Color
Screen: CHANNEL1, DISPLAY
Call up the CHANNEL1 or DISPLAY
screen.
Press the CH.SET key to call the desired
channel screen.
Move the flashing cursor to the position
shown in the figure on the left.
Use the function keys to make the
selection.
：Move the arrow up in the selection
window.
：Move the arrow down in the
selection window.
Selection
Selection
Method
Method
：Waveform display is enabled.
：Waveform display is disabled.
：The waveform density of the output
from the internal printer can be set
.
See Section 13.3.1.
Flashing curso
r
Set the display color for the waveform.