User Manual

196
────────────────────────────────────────────────────
9.3 Setting the CHANNEL1 Screen
────────────────────────────────────────────────────
Setting the
analog channel
1to16ch
Press the CH.SET key.
CHANNEL1 scree
n
CHANNEL1 screen
CHANNEL1 scree
n
CHANNEL2 screen
Press the CH.SET key.
Press the CHAN key.
Press the CH.SET key.
Setting the
analog channel
17 to 32 ch
Setting the
logic channel
CHA to CHH
Setting the
variable function
1to16ch
Setting the
variable function
17 to 32 ch
Setting the CHANNEL1 screen
The POSITION key and the RANGE key can be set the zero position and
measurement range on selected channel. The POSITION key and the
RANGE key can be used regardless of where the flashing cursor is located.
Setting the CHANNEL2 screen
Using the CH&NUM key can be set the numerical data.
9
.3 Setting the CHANNEL1 Screen
Indicates the CHANNEL screen organization. Press the CHAN key to call up
the CHANNEL screen.
Press the CHAN key to toggle the CHANNEL1 screen and CHANNEL2 screen.
Press the CH.SET key to toggle "analog channel 1 to 16", "analog channel 17 to
32" and "logic channel CHA to CHH".
■ Using the CH&NUM key