User Manual

194
────────────────────────────────────────────────────
9.2 Input Channel Setting Procedure
────────────────────────────────────────────────────
入力チャネルの設定を行います
Setting the Waveform Display Color
Setting the Ｍeasurement Range
Setting the Magnification/Compression Ratio
Along the Voltage Axis
Setting the Zero Position
Setting the Waveform Display Graph Position
Setting the Input Coupling
Setting the Low-Pass Filter
Setting the Logic Inputs
CHANNEL1 Screen
Display color
Display position
Function
Format
・For details on STATUS screen, refer to each function.
STATUS Screen
Single
Dual
Quad
Oct
Hex
MEM
REC
RMS
X-Y Single
X-Y Quad
（MEM&REC only）
STATUS Screen
REC&MEM
FFT
See Section 9.3.1
.
See Section 9.3.2
.
See Section 9.3.3
.
See Section 9.3.4
.
See Section 9.3.5
.
See Section 9.3.6
.
See Section 9.3.7
.
See Section 9.3.8
.
9
.2 Input Channel Setting Procedure