User Manual

167
────────────────────────────────────────────────────
8.4 STATUS2 Settings (FFT)
────────────────────────────────────────────────────
8
.4.4 Setting the Auto Print Function
Screen: STATUS
2
Press the STATUS key to call up the
STATUS2 screen.
Move the flashing cursor to the auto print
item, as shown in the figure on the left.
Use the function keys to make the
selection.
：Auto print is disabled.
：Auto print is enabled.
Selection
Selection
Method
Method
：Print image data can only be
transferred to the 9333 LAN
COMMUNICATOR when using a
LAN card.
When the function is enabled, printout is carried out automatically after a
measurement data is captured.