User Manual

165
────────────────────────────────────────────────────
8.4 STATUS2 Settings (FFT)
────────────────────────────────────────────────────
8
.4.2 Setting the Interpolation
Screen: STATUS
2
Press the STATUS key to call up the
STATUS2 screen.
Move the flashing cursor to the dot-line
item, shown in the figure on the left.
Use the function keys to make the selection
.
Method
Method
：Linear interpolation is not
performed. The sampled data is
displayed just as it comes.
：Linear interpolation is performed.
The display is easier on the eye.
Selection
Selection
The input signal (sampled data) and FFT waveform can be displayed and
recorded as is, or after linear interpolation.