User Manual

158

────────────────────────────────────────────────────

8.3 STATUS1 Settings (FFT)

────────────────────────────────────────────────────

NOTE

・Entering the number with CH&NUM key, see Section 9.6.1.

・When the scaling function is enabled for a channel, the unit selected for the

channel is displayed.

・The X-axis setting for the histogram can be changed on the Waveform

display screen or the CHANNEL1 screen. (If the upper or lower limit value

is changed, the x-axis is changed.)

・The unit (eu) setting is affected by the scaling setting. When scaling is

turned off, a unit of measurement range is displayed.