User Manual

155
────────────────────────────────────────────────────
8.3 STATUS1 Settings (FFT)
────────────────────────────────────────────────────
8
.3.10 Setting the X-axis and Y-axis Displays
Screen: STATUS1, DISPLAY
Call up the STATUS1 or DISPLAY screen
.
Move the flashing cursor to the x-axis item
,
shown in the figure on the left.
Use the function keys to make the selection
.
Method
Method
：Frequency (linear display)
：Frequency (logalism display)
Selection
Selection
Y-axi
s
(when octave analysis
)
：1/3 octave
：1/1 octave
Selection
Selection
X-axi
s
For the x-axis, select in the same way as
for y-axis.
：Real number part (linear display)
：Imaginary number part (linear
display)
：Amplitude (linear display)
：Amplitude (decibel display)
：Phase (degree display)
・Set the X and Y axis for display of FFT calculation results.
・Different units can be selected for the X and Y axis.
・With some FFT analysis modes, one of the axis cannot be set.