User Manual

iii

────────────────────────────────────────────────────

Safety Notes

────────────────────────────────────────────────────

WARNIN

This instrument is designed to comply with IEC 61010 Safety Standards,

and has been thoroughly tested for safety prior to shipment. However,

mishandling during use could result in injury or death, as well as damage

to the instrument Be certain that you understand the instructions and

precautions in the manual before use. We disclaim any responsibility for

accidents or injuries not resulting directly from instrument defects.

・The symbol printed on the instrument indicates that the user

should refer to a corresponding topic in the manual (marked with

the

symbol) before using the relevant function.

・In the manual, the

symbol indicates particularly important

information that the user should read before using the instrument.

Indicates a grounding terminal.

Indicates AC (Alternating Current).

Indicates DC (Direct Current).

Indicates both DC (Direct Current) and AC (Alternating Current).

Indicates the ON side of the power switch.

Indicates the OFF side of the power switch.

afety Notes

Safety symbols

This manual contains information and warnings essential for safe operation of

the instrument and for maintaining it in safe operating condition. Before

using the instrument, be sure to carefully read the following safety notes.

Accuracy

We define measurement tolerances in terms of f.s. (full scale) with the

following meanings:

f.s. (maximum display value or scale length)

The maximum displayable value or scale length. This is usually the name of

the currently selected range.