User Manual

139
────────────────────────────────────────────────────
7.3 STATUS1 Settings (REC&MEM)
────────────────────────────────────────────────────
Press the DISP key to display the
DISPLAY screen.
Move the blinking cursor to the location
indicated in the figure.
Press function key F4 (Record & Memory)
to display the recorder waveform screen
(REC & mem).
：Loads the memory waveform.
Specify the area to display as the memory
waveform with the A-B cursors.
Use the function key to select the "LOAD"
.
Flashing curso
r
Memory waveform load
s
■Memory Waveform Loading Example
In the figure at the left, cursor A marks the
starting point for memory waveform loading
at 5.5 s after trigger occurs. Pressing the
LOAD function key loads the memory
waveform.
The start of the loaded memory waveform
screen is positioned 5.5 s after trigger.
Cursor A
Load starting point
Screen: STATUS
2
Method
Method
Selection
Selection
NOTE
■Loading Memory Waveforms
The memory waveform is specified by use of the A-B cursors within the
recorder waveform.
If the area specified by the A or A-B cursors exceeds the loadable area, 2000
DIVs are loaded from the head to the cursor position.