User Manual

138
────────────────────────────────────────────────────
7.3 STATUS1 Settings (REC&MEM)
────────────────────────────────────────────────────
Screen: FILE
Press the FILE key to call up the FILE
screen.
Move the flashing cursor to the media item
,
and use the function key to select the "PC
card" or "MO".
Use the jog and shuttle controls or cursor
keys to select the index file of the data to
be loaded from the file list.
Move the flashing cursor to the command
item, and use the function key to select th
e
"LOAD".
Use the function keys to make selection.
：Determines the data to load.
：Cancel the command to load.
Selection
Selection
Method
Method
NOTE
■Loading Real-Time Save Data
To load data saved by Real-Time Save, load the index file (R_M). Data loaded
by the index file consists of all recorder waveforms and the header (2000 DIV)
of the memory waveform. Loading of the memory waveform is specified by use
of the A-B cursors within the recorder waveform.
Refer to Section 14.8, "LOAD" regarding loading data saved by Real-Time
Save.
When Real-Time Save is finished, the recorder waveforms remain in memory,
so it is not necessary to load the saved data.
To load a recorder waveform or memory waveform in the recorder and memory
functions, load the files with the REC and MEM extensions, respectively.