User Manual

135

────────────────────────────────────────────────────

7.3 STATUS1 Settings (REC&MEM)

────────────────────────────────────────────────────

.3.11 Setting the Real-Time Save

Press the STATUS key to call up the

STATUS1 screen.

Move the flashing cursor to the real time

save item, and ues the function keys to

make the selection.

When Real-Time Save is selected, the time

axis must be set to the valid range.

Move the flashing cursor to "Memory Time

Axis", and select using the displayed

function keys or jog control.

Select the "Recording Time Axis" at the

same time.

：Move the cursor up in the selection

window.

：Move the cursor down in the

selection window.

Selection

Screen: STATUS

Method

：Real time save is disabled.

：Real time save is enabled on PC card

：Real time save is enabled on MO disk

Data can be saved to memory in real time, and afterwards compressed and

stored on disk. Real-time save data is stored in binary format on the PC card

or internal MO drive.

Trigger settings are not applicable to the memory waveform, and the start of

Memory waveform recording coincides with the start of the Recorder

waveform.

The time axis of the Real-Time Save waveform may be 100 ms to 5 min/DIV

for channels 1 to 16, and 200 ms to 5 min/DIV for channels 17 and above.