User Manual

134
────────────────────────────────────────────────────
7.3 STATUS1 Settings (REC&MEM)
────────────────────────────────────────────────────
NOTE
・Auto saving is set to "RECORDER, MEMORY DATA," and batch saving is
executed (an index file is created). When either option (i.e., RECORDER or
MEMORY DATA) is selected, individual saving is executed.
・When auto-save is enabled, the storage channel cannot be selected. Data for
the channel for which the waveform is displayed is saved.
・For details on auto saving file name, refer to Section 14.7.
・When the recording length is "continuous", data are not stored.
・For details on connected SCSI device, refer to Section 14.4.
・When cursor A and B are enabled, partial saving is executed.
When "REC& MEM DATA" is set, partial saving is disabled.
・If additional recording is enabled, only newly acquired waveforms are saved.
Even when A and B cursors appear on the screen, no partial save is
performed.
・The media is common to recorder and memory recorder use the same media.
Separate media therefore cannot be selected.
・The directory and the number of files that can be stored in the directory are
limited. For details, see Section 14.7.
・During automatic storage, if the STOP key is pressed to interrupt
measurement, waveforms taken prior to the interruption are stored
automatically.