User Manual

ii
────────────────────────────────────────────────────
Inspection
────────────────────────────────────────────────────
NOTE
Options
8936 ANALOG UNIT
8937 VOLTAGE/TEMP UNIT
8938 FFT ANALOG UNIT
8939 STRAIN UNIT
8940 F/V UNIT
8947 CHARGE UNIT
9557 RS-232C CARD
9558 GP-IB CARD
9559 PRINTER CARD
9578 10BASE-T LAN CARD
9626 PC CARD 32M
9627 PC CARD 64M
9726 PC CARD 128M
9727 PC CARD 256M
9728 PC CARD 512M
9729 PC CARD 1G
9598 MO UNIT
9599 MEMORY BOARD（48 M words）
9229 RECORDING PAPER (6 rolls)
9229-01 RECORDING PAPER（PERFORATED）(6 rolls)
9197 CONNECTION CORD (for high voltage, maximum input voltage 500 V)
9198 CONNECTION CORD (for low voltage, maximum input voltage 300 V)
9199 CONVERSION ADAPTOR (BNC-BANANA)
9217 CONNECTION CORD（BNC - BNC）
9320 LOGIC PROBE (maximum input voltage 50 V)
9321 LOGIC PROBE (maximum input voltage 250 V)
*9303 PT
9318 CONVERSION CABLE（For 9270 to 72, 9277 to 79）
9319 CONVERSION CABLE（For 3273）
9322 DIFFERENTIAL PROBE
9324 POWER CORD (for logic connector)
9325 POWER CORD (for the 8940 F/V UNIT sensor connector)
3273 CLAMP ON PROBE（15 A, DC to 50 MHz）
3273-50 CLAMP ON PROBE（30 A, DC to 50 MHz）
*9018-10 CLAMP ON PROBE (10 to 500 A, 40 Hz to 3 kHz)
*9132-10 CLAMP ON PROBE * (20 to 1000 A, 40 Hz to 1 kHz)
*9270 CLAMP ON SENSOR * (20 A, 5 Hz to 5 kHz)
*9271 CLAMP ON SENSOR * (200 A, 5 Hz to 50 kHz)
*9272 CLAMP ON SENSOR * (20/200 A
, 5 Hz to 10 kHz)
9277 UNIVERSAL CLAMP ON CT * (20 A, DC to 100 kHz)
9278 UNIVERSAL CLAMP ON CT * (200 A, DC to 100 kHz)
*9279 UNIVERSAL CLAMP ON CT * (500 A, DC to 20 kHz)
*9555 SENSOR UNIT * (used with the 9270 to 9272, and the 9277 to 9279)
8910 CAN ADAPER
9333 LAN COMMUNICATOR
9555 WAVE PROCESSOR
・*: Not complied with the CE marking
・The 9270 to 9272 CLAMP ON SENSORs and the 9277 to 9279 UNIVERSAL
CLAMP ON CTs are used with the 9555 SENSOR UNIT. They cannot be
used by themselves.