User Manual

112
────────────────────────────────────────────────────
6.3 STATUS Settings (RMS)
────────────────────────────────────────────────────
6
.3.10 Setting the Auto Save Function
：When the media becomes full,
automatic storage stops.
：When the media becomes full, old
files are deleted to make room for
automatic storage.
With the binary format selected, th
e
file with the extension ’RMS’ is
deleted. With the text format
selected, files with the extension
TXT’ are deleted.
Screen: STATUS
1
Press the STATUS key to call up the
STATUS1 screen.
Move the flashing cursor to the auto save
item, as shown in the figure on the left.
Use the function keys to make the
selection.
：Auto save is disabled.
：Automatically stored on floppy disk
Selection
Selection
Method
Method
：Automatically stored on PC card.
：Automatically stored on connected
SCSI device.
：Data can only be transferred to the
9333 LAN COMMUNICATOR when
using a LAN card.
When Media is selected, the Storage
method item appears.
Selection
Selection
・When the function is enabled, measurement data are automatically stored
on a floppy disk, PC card, MO disk or connected SCSI device after they are
captured.
・The Auto Save function stores a file in the directory currently selected on
the file screen. See Section 14.12.2.