User Manual

93
────────────────────────────────────────────────────
5.5 Settings on the Display Screen (REC)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
1
Function
MEM,REC,RMS,REC&MEM,FFT ･Select function.
2
Trigger mode
SINGLE,REPEAT ･Select trigger mode.
3
Analog trigger
OFF,LEVEL,OUT,IN,CYCLE ･Set the analog trigger.
4
Time Axis Range
20 ms/DIV to 1 h/DIV ･Set the time 1 scale (1 DIV).
5
Compression
along the time ax
is
×10 to ×1/500
When the time axis is 20 to
50 ms/DIV, the waveforms ar
e
compressed and displayed
during measurement.
･By compressing the waveform, an entire
change can be promptly apprehended.
6
Recording
Length
SELECT：25 DIV to CONT
ARBITRARY：1 DIV to 2000 DI
V
(Capacity：16 M words)
･The length of recording for one
measurement operation (the number of
DIV) can be set.
7
Cursor
Measurement
OFF, , , ＋ ･The A/B cursors can be used.
Display size
NORMAL, WIDE ･The screen size can be changed by
pressing the DISP key.
Input channel
settings
・Analog input
・Logic input
・X, Y axis (X-Y format)
･Enables the measurement conditions for
each channel on the display screen to b
e
set or changed.
See Section 9.9.
Input level monitor
function
Press the LEVEL MON. key. ･See Section 11.5.
VIEW function
Press the VIEW key. ･See Section 11.6.
5
.5 Settings on the Display Screen (REC)
Explains the setting items on the Display screen.
For details on setting, refer to Section 5.3.
When want to use the JOG control, press the VALUE select key.（The selection window
is not displayed.)