User Manual

92
────────────────────────────────────────────────────
5.4 Using the X-Y CONT Recorder
────────────────────────────────────────────────────
：Move the cursor up in the selection
window.
：Move the cursor down in the
selection window.
Selection
Selection
Method
Method
Screen: CHANNEL
1
Press the CHAN key to call up the
CHANNEL1 screen.
Move the flashing cursor to desired
channel, and use the function keys to set
the waveform color (including displays
waveform ON/OFF).
Specify the X-axis channel.
Move the cursor to the channel to be used
as X axis. And use the function keys or
the JOG control to select X axis.
Specify the Y-axis channel.
This is done in the same way as in step
.
For graph 2 to graph 4, the settings are
made in an identical.
：Waveform is performed.
：Waveform is not performed.
Screen: STATUS, DISPLAY
Press the DISP key to call up the DISPLAY
screen.
Display clear: ON/OFF
Channel settings:
・Waveform Color (including displays
waveform ON/OFF)
・Setting the X-axis and Y-axis channels.
Method
Method
Setting the CHANNEL screen
Setting the DISPLAY screen