User Manual

91
────────────────────────────────────────────────────
5.4 Using the X-Y CONT Recorder
────────────────────────────────────────────────────
Press the STATUS key to call up the
STATUS screen.
Move the flashing cursor to the format
item.
Use the function keys to select the
"X-Y single" or "X-Y quad" format.
See Section 5.3.5.
Method
Method
Setting the Format
Setting the Display Size
Press the STATUS key to call up the
STATUS screen.
Move the flashing cursor to the display size
item.
Use the function keys to make the
selection. See Section 5.3.6.
Method
Method
Setting the Interpolation (dot-line)
Press the STATUS key to call up the
STATUS screen.
Move the flashing cursor to the dot-line
item.
Use the function keys to make the
selection. See Section 5.3.11.
Method
Method
Setting the Display Clear Function
Press the STATUS key to call up the
STATUS screen.
Move the flashing cursor to the
display clear item.
Use the function keys to make the
selection. See Section 5.3.12.
Method
Method
Setting the STATUS screen