User Manual

87
────────────────────────────────────────────────────
5.3 STATUS Settings (REC)
────────────────────────────────────────────────────
5
.3.10 Setting the Auto Save Function
Screen: STATUS
1
Press the STATUS key to call up the
STATUS1 screen.
Move the flashing cursor to the auto save
item, as shown in the figure on the left.
Use the function keys to make the
selection.
：Auto save is disabled.
：Automatically stored on floppy disk
Selection
Selection
Method
Method
：Automatically stored on PC card.
：Automatically stored on connected
SCSI device.
：Automatically stored on MO disk.
When Media is selected, the Storage
Method item appears.
：When the media becomes full,
automatic storage stops.
：When the media becomes full, old
files are deleted to make room for
automatic storage.
With the binary format selected, th
e
file with the extension ’REC’ is
deleted.
With the text format selected, files
with the extension ’TXT’ are
deleted.
Selection
Selection
：Data can only be transferred to the
9333 LAN COMMUNICATOR when
using a LAN card.
・When the function is enabled, measurement data are automatically stored
on a floppy disk, PC card, MO disk or connected SCSI device after they are
captured.
・The Auto Save function stores a file in the directory currently selected on
the file screen. See Section 14.12.2.