User Manual

4
______________________________________________________________________
(1) Measuring the Voltage Waveform of a 220 V AC Source (Memory Recorder Function)
________________________________________________________________
1. Press the SET key to display the Status screen.
3. Press the SET key to display the Trigger screen.
SET
DISP
SYSTEM
3
4 5
Settings for Channel 1 (CH1)
1. Trigger mode:
SING
(single) (input the
waveform once)
2. Trigger source:
OR
3. Trigger type:
LVL
(Level)
4. Trigger level:
0.000 V
5. Slope: (rising)
1
2
0.000 V
Tri
gg
er
p
oint
Trigger Setting
The trigger activates at the rising
zero crossing (0.000V)
(Measurement is started.)
1. Press the SET key to display the Status screen.
Start Measurement
Press the START key to st art measurement.
The unit remains in the Trigger Waiting
Condition until the trigger condition occurs.
When the trigger occurs, the waveform is input
for the set recording length.
STA RT
STOP