User Manual

10
______________________________________________________________________
(3) Measuring a Current Waveform Using the 9018-10 (Memory Recorder Function)
________________________________________________________________
1. Press the SET key to display the Status screen.
3. Press the SET key to display the Trigger screen.
SET
DISP
SYSTEM
3
4 5
Settings for Channel 2 (CH2)
1. Trigger mode:
SING
(single)
(input the waveform once)
2. Trigger source:
OR
3. Trigger type:
LVL
(Level)
4. Trigger level:
5.000 A
5. Slope: (rising)
1
2
Tri
gg
er
p
oint
Trigger Setting
The trigger activates at the rising
5.000A crossing.
(Measurement is started.)
5.000 A
Press the START key to st art measurement.
The unit remains in the Trigger Waiting
Condition until the trigger condition occurs.
When the trigger occurs, the waveform is input
for the set recording length.
STA RT
STOP
1. Press the SET key to display the Status screen.
Start Measurement