Data Sheet

ManualsBrandsHIOKI ManualsNetwork EquipmentLAN Cable Tester HIOKI 3665-20

Network Construction with

One Single Instrument

Wiremap

Detect Split Pairs with Wiring Check

Cable Length

Get NVP-Enhanced Measurement Accuracy

Direction

Identify Up to 21 Cable Destinations

Actual Size

Network Construction with

One Single Instrument

LAN CABLE HiTESTER 3665

-20

Optical/Telecom Measurement

Network Construction with

One Single Instrument

Actual SizeActual Size

Network Construction with

One Single Instrument

Summary of content (4 pages)

PAGE 1
LAN CABLE HiTESTER 3665-20 Optical/Telecom Measurement Network Construction with One Single Instrument Wiremap Detect Split Pairs with Wiring Check Cable Length Get NVP-Enhanced Measurement Accuracy Actual Size Direction Identify Up to 21 Cable Destinations
PAGE 2
1 Wide LCD Screen Extremely Just connect a cable, and Intuitive press the TEST button Check all parameters such as wiremap, direction and cable length at a glance. 2 Direction (ID No.) Identify the terminator ID here. 3 Cable Length 1 Obtain a record of the entire length of the cable, or up to the point where the cable is damaged. Wiremap (Wiring Status) Large PASS/FAIL display, cable type, reason for cable failure and shield condition.
PAGE 3
2 2 Direction Locate up to 21 unique cable destinations. Have you ever had trouble installing additional cables? Take advantage of the conveniences offered by the tester's capabilities to check wiring while confirming multiple cable destinations. Increased Efﬁciency! You will never need to go back and forth again just to change the terminators. Up to 21 terminators can be connected (additional terminators sold separately.) Convenient for confirming the connection destinations of multiple cables.
PAGE 4
3 ■ Specifications (@ 23 ±5 °C, 80% RH or less, non-condensating, with battery indicator unlit) Measurable cables Twisted-pair cable 100 Ω characteristic impedance, shielded and unshielded, CAT 3, 4, 5, 5e and 6 Compatible connectors RJ-45 plugs Measurement Items Wiring condition and shielding can be confirmed using the HIOKI TERMINATOR 9690 [Wiremap] Detectable errors: open, short, reversed, transposed, split pairs and other miswiring Measurable lengths: 2 to 300 m, 6.