User Guide

2.4 Resistance Measurement
22
2.4 Resistance Measurement
• Never apply voltage to test leads when
the Resistance function is selected.
Doing so may damage the product and
result in personal injury.
• To avoid electrical accidents, remove
power from the circuit before measuring.
Black
Red
Black
Red
1.
Move the function selector to th
e
Ω position.
2. Connect the red test lead to term
i-
nal V.Ω, and the black test lead
to
terminal COM.
3. Connect the test leads to th
e
measurement object, and rea
d
the indicated value.
Selecting the manual range:
Reselecting the auto range:
RANGE (AUTO is turned off)
RANGE (Press for at least 1 sec-
ond) ("AUTO" lights up)
Holding the measured
value:
(HOLD AUTO Function: page
27) or
(HOLD Function: page 28)
H.AUTO/REL→Measurement
→Intermittent sound→
Move the test leads away from the
measurement object.
H.AUTO/REL
+Power-on→ Mea-
surement
→H.AUTO/REL