Data Sheet

ManualsBrandsHIOKI ManualsTest & Measuring EquipmentPower Quality Analyzer HIOKI 3196

Demand calculation function

Settings

Analysis start time/period

Set the year, month, day, hours, minutes,

and seconds. /1 to 31 days

Demand interval settings :

5, 10, or 30 minutes, 1, 2, 3, 6, or 12 hours

Display method and calculation items :

Demand graph

(for consumption only)

, Average demand

(average demand value

for the specified analysis period)

, Maximum demand

(maximum demand value for the

specified analysis period)

, Load ratio

(average demand/maximum demand × 100 [%])

ITIC curve display function

Display function : Plot event points on limited value curve (points indicating

swell/dip/interruption occurrence period and voltage)

Percent of nominal voltage: Maximum swell voltage or residual voltage ratio against

official voltage

Violation count display : Number of upper-limit violations, number of lower- limit

violations, and total number of events

Limit curve selection

: ITIC curve or user-defined curve (any setting)

EN50160 display function

Screen display : Overview/Harmonic/Signaling/Measurement result sorting

Copy function

Copy content

Saves the various screens in BMP format

Print function

Print format: Prints screen images, Paper size: A4 and Letter, Print preview: Yes

CSV format conversion function

Screens that can be converted

TIME PLOT and event waveform screens

Conversion settings

Specified interval conversion (TIME PLOT screen only)

Conversion setting selection (TIME PLOT screen only)

Report creation function

Output format : Output setting contents can be printed, or saved as a rich text file.

(1) Automatic output :

RMS voltage fluctuation graph, worst case, maximum/minimum

list, total harmonic voltage distortion graph, Overview and

Signaling data of EN50160, and all event detail list.

(2) Arbitrary output : Includes, in addition to automatic output, RMS current

fluctuation graph, transient waveform, total harmonic current

distortion graph, Harmonic and result classification data of the

EN50160, and settings list.

(3) Detailed output : Voltage fluctuation, RMS fluctuation, harmonics fluctuation, and

interharmonics fluctuation.

Settings save function

Save user-defined curves, setting for sorting measurement result, report setting, etc.

Download function

Download data from the 3196 via LAN.

3196 Specifications

-2. Basic specifications

Power quality measurement

standards conformance

IEC61000-4-30:2002,

IEEE1159,

EN50160:1999

Clock functions

Auto calendar, auto leap year, 24-hour clock

Real-time clock accuracy

Within ±0.3 s/day (when the 3196 is turned on)

Internal memory capacity for data

13 MB (time series and event data)

Maximum recording interval

1 month (internal memory)

Measurement time control

Manual/Specified time

Time series data settings

Recording item setting patterns

Power, P&Harm, and ALL DATA

MAX/MIN/AVE values

AVE values, ALL values (maximum,

minimum, and average values)

Interval selections

1, 3, 15, or 30 seconds, 1, 5, 10, 15, or

30 minutes, 1 or 2 hours

Event settings

All measurement settings except

flicker and inter-harmonics

Event threshold value setting

OFF or desired numerical value

Maximum number of recording events

100 (internal memory)

(Simultaneous events count as 1 event.)

Power supply

12 V DC from the 9458 AC ADAPTER or 9459 BATTERY PACK

Maximum rated power

40 VA

Continuous operating time with battery :

Approximately 30 minutes

(9459 battery pack)

External dimensions

Approximately 298W (11.73") × 215H (8.46") × 67D

(2.64") mm (not including projections)

Mass

Approximately 2.25 kg (79.4 oz.) (including 9459 battery pack)

-1. Measurement and recording items

Recording item

Power

P&Harm

ALL_D

Recording item

Power

P&Harm

ALL_D

Transient overvoltage

❍

Voltage unbalance factor

❍

Voltage swell

❍

Current unbalance factor

❍

Voltage dip

❍ ❍

❍

Harmonic voltage

❍

Instantaneous interruption

❍

Harmonic current

❍

Frequency

❍ ❍

❍

Harmonic power

❍

RMS voltage

❍

Harmonic voltage-current phase difference

❍

RMS current

❍

Inter-harmonic voltage

❍

Voltage peak

❍

Inter-harmonic current

❍

Current peak

❍

Total harmonic voltage distortion factor

❍

Effective power

❍

Total harmonic current distortion factor

❍

Apparent power

❍

Total inter-harmonic voltage distortion factor

❍

Reactive power

❍

Total inter-harmonic current distortion factor

❍

Power factor/Displacement power factor

❍

K factor

❍ ❍

❍

Flicker (∆V10/Pst, Plt)

❍

* Select from a total of six different patterns when recording data. These consist of three available data patterns

(Power, P&Harm, or ALL DATA), combined with two patterns, AVE and ALL (maximum, minimum, and average), of

detailed data for each measurement item.

9624 /

-10

Specifications

-1. Function specifications

Data loading functions

Data that can be loaded

Binary data recorded using the 3196

SET files

(Settings data)

, ITV files

(TIME PLOT data)

EVT files

(Event data (lists, voltage and current waveforms,

transient waveforms, numerical values)

, FLC files (Flicker

data

(∆V10, IEC)

), TRN files

(Transient waveforms),

EN50160. files (EN50160 dasta),

EVENT.EN files (EN50160 Event data)

Maximum data capacity

Up to 528 MB

Data display functions

SYSTEM display function

Screen display

SYSTEM (settings) content screen

TIME PLOT display function

Screen display

RMS fluctuation, voltage fluctuation, harmonic

fluctuation, inter-harmonic fluctuation

Number of display screens

Up to 4 screens

Cursor function

A and B cursors (interval calculation function provided)

EVENT list display function

Screen display

EVENT list content display

Display method selection

Order events occurred in, or order of priority

EVENT data display function

Display function

Display the event data selected in the EVENT list

display screen

Screen display

Display one of the following screens ((1) to (4))

(1)Waveform display :

Select from the voltage/current waveform, 4-channel

voltage waveform, 4-channel current waveform, and

voltage/transient overvoltage waveform displays.

(2)Vector display :

Select from the harmonic RMS value and phase angle

displays.

(3)DMM display :

Displays power, voltage, and current values.

(4)Harmonics display :

Select from the harmonics bar graph and list displays.

Cursor function

A and B cursors (interval calculation function provided)

for the waveform display screen

Positive/ Negative/ Zero phase calculation function

:Display voltage and current of the positive phase, negative

phase, and zero phase.(In vector display screen, this is conducted

during the 3P4W wiring analysis.)

Flicker graph Display function

Screen

display

∆V10

Flicker graph or IEC Flicker graph

Cursor function

A and B cursors (interval calculation function provided)

EVENT voltage fluctuation graph Display function

Cursor function

A and B cursors (interval calculation function provided)

Integral power consumption calculation function

Settings

Analysis start time/period

Set the year, month, day, hours, minutes,

and seconds. /1 to 31 days

Display method and calculation items :

Integral power consumption graph, Integral power consumption (consumption +

regeneration, and cursor measurement functions provided), Maximum integral power

consumption (final integral power consumption for the specified analysis period)

-2. Basic specifications

Supplied accessories

CD-R × 1

Operating environment

PC/AT-compatible devices

English or Japanese versions of the following

• Microsoft Windows 95

(9624 only, OSR2 or later versions

only supported, Internet Explorer 3 or later required)

• Microsoft Windows 98, Me, NT 4.0, 2000 or XP

Memory

At least 128 MB

(Items in blue ■ symbolize specifications unique to Model 9624

-10

, and are not available in the standard Model 9624.)