Installation & Assembly

Assembly
STEP 3
A1
H1
H2
C2
C1
C1
C2
B1
B2
B2
B1
H1
H2
Fig. 5
Fig. 5
Fig. 5
B1 / C1
B2 / C2
AA
Fig. 6 Fig. 7
Fig. 6
A1
A1
A1
Fig. 7
Fig. 7
A1
H1
H2
AA
H1 / H2
AA
B1 / B2 / C1 / C2
Fig. 8
Fig. 8
FF
S
Fig.5: Use Bolt (M6x12) (AA) to connect Cross Beam (B1)
and Cross Beam (B2).
Use Bolt(M6x12) (AA) to connect Cross Beam (C1) and
Cross Beam C2.
Fig.6: Use Bolt(M6x12) (AA) to connect Connector (H2/H1)
and Post (A1).
Fig.7: Use Bolt(M6x12) (AA) to connect Connector (H2/H1)
and Cross Beam (B1/B2/C1/C2).
Fig.8: Hammer Anchors (FF) through one of the holes at
each post base, into the ground to stablize the .
Repeat these instructions for the other posts.