0'x10' Pergola
WARNING: Fabric meets CPAI-84 specification for flame resistance. It is Not Fire Proof. The fabric will burn if left in continuous contact with any flame source. The application of any harsh chemicals to the fabric may render the flame-resistant properties ineffective. Always read and follow the instructions before use. When assembling and using this product, basic safety precautions must always be fol lowed to reduce risk of personal injury and damage to the product or surroundings.
PARTS LIST Description Sketch QTY.
Assembly Fig. 2 STEP 1 B1 O C2 A1 Fig. 1 R S Fig. 1 Fig. 2 A1 N DD R B1 AA S C2 BB A1 O Fig.1: Let Post Decoration (R) pass through Post (A1) first. Then use Bolt (M6x12) (AA) to connect Post (A1) and Post Hoof (S). Fig.2: Let Post Decoration (O) pass through Post (A1) first. Please make sure to complete this steps before next following steps. Then use Bolt (M6x75) (DD) and Bracket (N) to assemble Cross Beam (C2) and Cross Beam (B1) to Post (A1).
Assembly STEP 2 C1 Fig. 4 B2 O A1 Fig. 3 Fig. 3 A1 Fig. 4 N R DD C1 AA S B2 A1 O BB Fig.3: Let Post Decoration (R) pass through Post (A1) first. Then use Bolt (M6x12) (AA) to connect Post (A1) and Post Hoof (S). Fig.4: Let Post Decoration (O) pass through Post (A1) first. Please make sure to complete this steps before next following steps. Then use Bolt (M6x75) (DD) and Bracket (N) to assemble Cross Beam (C1) and Cross Beam (B2) to Post (A1).
Assembly STEP 3 g. Fi C1 ig. C2 F 5 H2 B1 Fig. 7 7 Fig. 6 B2 Fig. 5 H1 C1 A1 B2 B1 C2 A1 Fig. 8 A1 H1 H2 A1 Fig. 5 Fig. 6 Fig. 7 A1 B1 / C1 H1 B1 / B2 / C1 / C2 H2 AA B2 / C2 Fig. 8 FF S AA AA H1 / H2 Fig.5: Use Bolt (M6x12) (AA) to connect Cross Beam (B1) and Cross Beam (B2). Use Bolt(M6x12) (AA) to connect Cross Beam (C1) and Cross Beam C2. Fig.6: Use Bolt(M6x12) (AA) to connect Connector (H2/H1) and Post (A1). Fig.
Assembly STEP 4 Fig. 10 D1 D1 D2 Fig. 12 D2 9 g. G Fi Fig. 10 G F G Fig. 11 F Fig. 9 Fig. 11 Fig. 10 CC D2 D1 B1 / M A1 F B2 G AA 2 AA D 1 /D Fig.9: Use Bolt(M6x12) (AA) to connect Roof Tube (D1) and Roof Tube (D2). Fig.10: Use Bolt (M6x55) (CC) to assemble Roof Tube (D1/D2) and Cross Beam (B1/B2). Repeat these instructions for the other roof tubes. Fig.11: At the bottom of Post (A1), using Bolt (AA) to connect Bracket (G) and Post (A1).
Assembly STEP 5 P P g. Fi g. Fi 14 13 E1 3 1 g. Fi E1 E2 Fig. 13 Fig. 14 Fig. 15 F P E1 CLIC K! E2 E1 & E2 M AA Fig.13: Insert the Pulling Rod (E1) to Pulling Rod (E2). Fig.14: Pass the 2pcs Shade Fabric (P) through the Roof Tube (D1/D2) in turn as above diagram. Insert the Pulling Rod (E1/E2) to Shade Fabric. After assembled, please pull the Shade Fabric, make sure it runs smoothly. Fig.15: Using Bolt (AA) to connect Bracket(M) to Pulling Rod(E1/E2).
