Installation & Assembly

Wall Mount:
1. Score and break o the mounting bracket
2. Use the template to drill pilot holes in the wall.
3. Fasten screws (not included) in the wall. Leave about 1/8 of
an inch between the screw head and the wall.
4. Slide the xture over the screws. Tighten the screws with a
screw driver once the xture is in place.
Note: Fixture may be aimed upward to gaze or highlight a
surface
Wall Mount
Painting:
The body of the xture can be painted to match or contrast
the installation location if the existing color is not desired.
Remove the LED engine from the body of the xture before
painting. To remove the engine, unscrew the nuts on the back
of the xture with a 3/16 inch size 1/4 inch drive 6 point
socket.
4 3/8"
1/8"
5/8"
5"
HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 (p)800.442.5539 / (f) 440.653.5555 www.hinkleylighting.com
Hole for wire routing,
can be on either side depending
on which side the wires are on.
Installation Instructions
Family: Nuvi Hardscape | Item No. 15446