Instruction Manual

UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
04
|
hinkley.com
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.
Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
PACKAGE CONTENT
1 Blade Set of 3
2
Mounting Bracket
3
Fan Motor Assembly
4
5
6
7
8
9
1
5
2
6
3
4
9
NOTE: Design of parts shown above may look slightly different for
your specific model of fan.
Blade Arm Set of 3
Decorate Cover
Receiver (Pre-Installed on top of
the motor )
Bracket Mounting Hardware
(wood screws, screws, lock
washers, star washers, flat washers,
wire nuts), Blade to Motor Screws
with Lock Washers, Balance Kit,
Safety cable hardware
(wood screw, flat washer)
Hardware Bag
Motor Housing
MH901058Fxx
980014FWH-R
LW901072Fxx
HS901072Fxx
x
x
BLA901072Fxx
BL901072Fxx
CN901072
XX=FAN FINISH
Cradle B (for flat wall use only)
Cradle A, Wall Plate, Face Plate,
2 Mounting Screws,
Wall Control w/2032 Battery,
7
8
+