Instruction Manual

08 hinkley.com

FINISHING THE INSTALLATION

Remove the four washers and nuts from mounting bracker,

move the motor into position over the four mounting studs and

secure with the nuts and washers previously removed. (Fig. 1)

Raise the motor housing up against the mounting bracket, the

four supports inside the motor housing should be placed

against the four studs on mounting bracket, twist the motor

housing clockwise until snug. (Fig. 2)

Fig. 2

Nuts

Washers

Motor

Housing

Mounting studs

Mounting

Bracket

Fig. 1

Studs

Supports

Motor

Bracket