Instruction Manual

hinkley.com

UNPACKING YOUR FAN

UNPACK YOUR FAN AND CHECK THE CONTENTS.

• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all

parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.

• Examine all parts. You should have the following:

PACKAGE CONTENTS

1 Hanging Bracket

CA904566FXX2 Ceiling Canopy

3 Trim Ring

4 Downrod Assembly DRK94016FXX

5 Yoke Cover YC905360FXX

6 Fan Housing with Motor

7 Blade Set of 6 BL905360FXX

8 Blade Arm Set of 6

BLI905360FXX

9 LK Pan AP905360FXX

10 16W LED Module E905360LED

11 Shade Assembly GL905360FR

12 Receiver incl. Wire Nuts CWT905360

Wall Control w/2032 Battery, Cradle

A, Wall Pate, Face Plate, Mounting

Screws, Cradle B (for ﬂat wall use only)

980014FWH-R

Hardware Bag

Hanging bracket hardware, Safety

cable hardware, Blade screws,

Spacers, Blade bracket screws, Blade

balancing kit

MH905360

xx=FAN FINISH

NOTE: Design of parts shown above may look slightly

diﬀerent for your speciﬁc model of fan

AC IN