Instruction Manual

INSTALLING THE WALL CONTROL (continued)

Remove the existing wall plate and old switch from the wall

outlet box. (Fig. 3)

Connect the black lead wires from the switch in cradle A to

the black wires in the switch box. Hot input wire to one of the

cradle switch leads. Power lead to the fan is connected to the

remaining switch lead. (Fig. 4)

Attach cradle A to the wall switch box using supplied hardware.

Attach the multi-gang face plate (not included) to the switch

set in the wall outlet box. Cradle A Hinkley switch will ﬁt in any

standard decora face plate.

Option 3. For Multi-Gang Wall Switch Box

NOTE: Remote transmitter will be held in place with built in magnets.

HIRO Control System

Figure 3

Figure 4

Outlet box

Face plate

Switch

Outlet box

Transmitter

Face plate

Cradle A