Installation Guide

H I N K L E Y L I G H T I N G 12600 Berea Road Cleveland, OH 44111 800.446.5539 / 216.671.3300 www.hinkleylighting.com
assembly instructions
Family: Veranda Item No. 4894 SU
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. To assemble fixture, slip leaf (A) and then tube (B) over nipple (C).
2. Thread loop (D) onto nipple (C).
3. Please refer to the hanging instruction sheet (I.S. 19-75) provided to hang fixture.
Then refer back to this sheet to continue installation of this fixture.
1. To install glass, remove socket ring (1) and ring (2) from socket (3).
2. Slip glass (4) on to socket (3).
3. Thread socket ring (1) and ring (2) back onto socket (3).
4. Repeat steps 1-3 for remaining glass.
5. To attach crystals, hang crystal drop (5) from small ring (6) and repeat with remaining
crystals.
6. Fixture can now be lamped accordingly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging the
fixture from the ceiling, and then attaching crystal pentalogues.
start here
4894
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Note: Maximum wattage for 4894 fixture is 100 watts per bulb.
Drawing 1 - Fixture Assembly
3
D
B
A
C
1
2
4
3
5
6
2.7.08