Instructions / Assembly

STEP 2: _________________________________________________________________________________________

Place the Bench Back (C) under back post and align the

Pre-drilled holes in post with inserts in the Back (C). Insert

a Side Bolt (F) into the hole and tighten. Repeat for lower

pre-drilled hole in Bench Back (C). Leave bolt loose as before.

Fig. 3

FIG. 3

STEP 3:____________________________________________________ _____________ _______________________

Place Bench Long Stretcher (G) under front post of

Bench Side (A) and align the pre-drilled hole with the

insert in the Long Stretcher (G). Insert Side Bolt (F)

and thread in Note: Stretchers are interchangeable.

Fig. 4

FIG. 4