User's Manual

深圳星脉医疗仪器有限公司
深圳星脉医疗仪器有限公司
10 EMC information
This product needs special precautions regarding EMC and needs to be installed and put into
service according to the EMC information provided, and this unit can be affected by portable and
mobile RF communications equipment.
Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit.
This may result in incorrect operation of the unit.
Caution: This unit has been thoroughly tested and inspected to assure proper performance
and operation!
Caution: this machine should not be used adjacent to or stacked with other equipment and
that if adjacent or stacked use is necessary, this machine should be observed to verify normal
operation in the configuration in which it will be used
Guidance and manufacture’s declaration – electromagnetic emission
TheDBP-01P DBP-01HP is intended for use in the electromagnetic environment specified below. The
customer of the user of theDBP-01P DBP-01HP should assure that it is used in such an environment.
Emission test
Compliance
Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
TheDBP-01P DBP-01HP use RF energy
only for its internal function. Therefore, its
RF emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
RF emission
CISPR 11
Class B
TheDBP-01P DBP-01HP is suitable for use
in all establishments, other than domestic
and those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Not applicable