Operating instructions

3 Insert tools, accessories

Designation Description

Chucks TE‑C CLICK

Hammer drill bits ∅ 5…28 mm

Forming and installation drill bits ∅ 5…20 mm

Lightweight percussion core bits ∅ 25…68 mm

Multipurpose hole saws ∅ 25…82 mm, hexagonal

Pointed chisel C-type connection end

Flat chisel C-type connection end

Shaped chisels C-type connection end

Anchor-setting tools C-type connection end

Quick-release chuck for wood and metal drill bits For smooth or hex. shank

Key-type chuck With smooth or hex. shank

Wood drill bits ∅ 3…20 mm

Metal drill bits ∅ Max. 13 mm

Metal drill bits / stepped drill bits ∅ 5…22 mm

Designation Description

Dust module TE DRS-M

Angular chuck C-type connection end

4 Technical data

Right of technical changes reserved.

NOTE

The power tool is available in various voltage ratings. Please refer to the power tool’s type identification plate for

details of its rated voltage and rated input power.

Power tool

TE 7‑C

Rated power input Rated voltage 100 V: 680 W

Rated voltage 110 V: 660 W

Rated voltage 110…127 V: 660 W

Rated voltage 220…240 V: 720 W

Mains frequency 50…60 Hz

Weight in accordance with EPTA procedure 01/2003 3.5 kg

Dimensions(LxWxH) 341mmx86mmx217mm

Drilling speed without hammering 0…900/min

Hammer drilling speed 740/min

Single impact energy in accordance with EPTA proced-

ure 05/2009

2.6 J

NOTE

The vibration emission level given in this information sheet has been measured in accordance with a standardised test

giveninEN60745andmaybeusedtocompareonetoolwithanother.Itmaybeused for a preliminary assessment

of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is

used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This

may significantly increase the exposure level over the total working period. An estimation of the level of exposure to

vibration should also take into account the times when the tool is switched off or when it is running but not actually

Printed: 19.05.2014 | Doc-Nr: PUB / 5071207 / 000 / 02