Operating Instruction NUN 054 IE-A22 (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 Preparations at the workplace
- 5.2 Charging the battery
- 5.3 Inserting the battery
- 5.4 Removing the battery
- 5.5 Fitting the crimping / pressing or cutting jaws
- 5.6 Removing the crimping / pressing or cutting jaws
- 5.7 Inserting the crimping die (only for crimping jaws with crimping dies)
- 5.8 Removing the crimping die (only for crimping jaws with crimping dies)
- 5.9 Changing the cutting edges
- 5.10 Crimping
- 5.11 Making the cut
- 6 Care and maintenance
- 7 Transport and storage of cordless tools
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
- 11 Further information
- Notice d'utilisation originale
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 4 Caractéristiques techniques
- 5 Utilisation
- 5.1 Préparatifs
- 5.2 Recharge de l'accu
- 5.3 Introduction de l'accu
- 5.4 Retrait de l'accu
- 5.5 Mise en place de la pince à sertir ou à couper
- 5.6 Retrait des mors à sertir ou à couper
- 5.7 Mise en place de l'insert de sertissage (pince à sertir avec mors à sertir uniquement)
- 5.8 Retrait de l'insert de sertissage (pince à sertir avec mors à sertir uniquement)
- 5.9 Remplacement des lames de coupe
- 5.10 Faire le sertissage
- 5.11 Réalisation d'une coupe
- 6 Nettoyage et entretien
- 7 Transport et stockage des appareils sur accu
- 8 Aide au dépannage
- 9 Recyclage
- 10 Garantie constructeur
- 11 Informations complémentaires
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Manejo
- 5.1 Preparación del trabajo
- 5.2 Carga de la batería
- 5.3 Colocación de la batería
- 5.4 Extracción de la batería
- 5.5 Colocación de las mordazas de prensa o corte
- 5.6 Extracción de las mordazas de prensa o corte
- 5.7 Inserción del útil de prensado (solo para mordazas de prensa con útiles de prensado)
- 5.8 Extracción del útil de prensado (solo para mordazas de prensa con útiles de prensado)
- 5.9 Cambio de las hojas de corte
- 5.10 Ejecución de la operación de prensado (crimpado)
- 5.11 Ejecutar operación de corte
- 6 Cuidado y mantenimiento
- 7 Transporte y almacenamiento de las herramientas alimentadas por batería
- 8 Ayuda en caso de averías
- 9 Reciclaje
- 10 Garantía del fabricante
- 11 Más información
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 4 Características técnicas
- 5 Utilização
- 5.1 Preparação do local de trabalho
- 5.2 Carregar a bateria
- 5.3 Colocar a bateria
- 5.4 Retirar a bateria
- 5.5 Aplicar garras de aperto ou de corte
- 5.6 Retirar as garras de aperto ou de corte
- 5.7 Aplicar o caixilho de pressão (apenas para garras de aperto com caixilhos de pressão)
- 5.8 Retirar o caixilho de pressão (apenas para garras de aperto com caixilhos de pressão)
- 5.9 Substituir as lâminas de corte
- 5.10 Executar o processo de aperto (cravação)
- 5.11 Efectuar trabalho de corte
- 6 Conservação e manutenção
- 7 Transporte e armazenamento de ferramentas de baterias recarregáveis
- 8 Ajuda em caso de avarias
- 9 Reciclagem
- 10 Garantia do fabricante
- 11 Mais informações
2 English 2188463
*2188463*
1.3 Symbols on the power tool
1.3.1 Symbols
The following symbols are used:
Risk of crushing injury!
Risk of cutting injury!
Wear protective glasses!
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
Direct current (DC)
Li-ion battery
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Crimping / pressing and cutting tool NUN 054 IE-A22
Generation 01
Serial no.
2 Safety
2.1 General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.