Operating Instruction NUN 054 IE-A22 (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 Preparations at the workplace
- 5.2 Charging the battery
- 5.3 Inserting the battery
- 5.4 Removing the battery
- 5.5 Fitting the crimping / pressing or cutting jaws
- 5.6 Removing the crimping / pressing or cutting jaws
- 5.7 Inserting the crimping die (only for crimping jaws with crimping dies)
- 5.8 Removing the crimping die (only for crimping jaws with crimping dies)
- 5.9 Changing the cutting edges
- 5.10 Crimping
- 5.11 Making the cut
- 6 Care and maintenance
- 7 Transport and storage of cordless tools
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
- 11 Further information
- Notice d'utilisation originale
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 4 Caractéristiques techniques
- 5 Utilisation
- 5.1 Préparatifs
- 5.2 Recharge de l'accu
- 5.3 Introduction de l'accu
- 5.4 Retrait de l'accu
- 5.5 Mise en place de la pince à sertir ou à couper
- 5.6 Retrait des mors à sertir ou à couper
- 5.7 Mise en place de l'insert de sertissage (pince à sertir avec mors à sertir uniquement)
- 5.8 Retrait de l'insert de sertissage (pince à sertir avec mors à sertir uniquement)
- 5.9 Remplacement des lames de coupe
- 5.10 Faire le sertissage
- 5.11 Réalisation d'une coupe
- 6 Nettoyage et entretien
- 7 Transport et stockage des appareils sur accu
- 8 Aide au dépannage
- 9 Recyclage
- 10 Garantie constructeur
- 11 Informations complémentaires
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Manejo
- 5.1 Preparación del trabajo
- 5.2 Carga de la batería
- 5.3 Colocación de la batería
- 5.4 Extracción de la batería
- 5.5 Colocación de las mordazas de prensa o corte
- 5.6 Extracción de las mordazas de prensa o corte
- 5.7 Inserción del útil de prensado (solo para mordazas de prensa con útiles de prensado)
- 5.8 Extracción del útil de prensado (solo para mordazas de prensa con útiles de prensado)
- 5.9 Cambio de las hojas de corte
- 5.10 Ejecución de la operación de prensado (crimpado)
- 5.11 Ejecutar operación de corte
- 6 Cuidado y mantenimiento
- 7 Transporte y almacenamiento de las herramientas alimentadas por batería
- 8 Ayuda en caso de averías
- 9 Reciclaje
- 10 Garantía del fabricante
- 11 Más información
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 4 Características técnicas
- 5 Utilização
- 5.1 Preparação do local de trabalho
- 5.2 Carregar a bateria
- 5.3 Colocar a bateria
- 5.4 Retirar a bateria
- 5.5 Aplicar garras de aperto ou de corte
- 5.6 Retirar as garras de aperto ou de corte
- 5.7 Aplicar o caixilho de pressão (apenas para garras de aperto com caixilhos de pressão)
- 5.8 Retirar o caixilho de pressão (apenas para garras de aperto com caixilhos de pressão)
- 5.9 Substituir as lâminas de corte
- 5.10 Executar o processo de aperto (cravação)
- 5.11 Efectuar trabalho de corte
- 6 Conservação e manutenção
- 7 Transporte e armazenamento de ferramentas de baterias recarregáveis
- 8 Ajuda em caso de avarias
- 9 Reciclagem
- 10 Garantia do fabricante
- 11 Mais informações
*2188463*
2188463 English 1
Original operating instructions
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the product.
• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.