Operating Instruction TE 6-A36 (04)
8 English
TE 6A36
Single impact energy
2.5 J
Drilling diameter range in concrete/masonry (hammer
drilling)
1/8 in …3/4 in
Drilling diameter range in concrete/masonry (hammer
drilling)
5 mm …20 mm
Drilling diameter range in wood (solid)
1/8 in …3/4 in
Drilling diameter range in wood (solid)
3 mm …20 mm
Drilling diameter range in metal (solid-head drill bit)
1/8 in …1/2 in
Drilling diameter range in metal (solid-head drill bit)
3 mm …13 mm
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Remove the battery before making any adjustments to the power tool or before
changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.2 Inserting the battery
CAUTION
Risk of injury! Inadvertent starting of the rotary hammer drill.
▶ Before installing the battery, check that the rotary hammer drill is switched off
and that the forward/reverse switch is in the middle position (i.e. safety lock
engaged).
1. Push the battery into the battery holder until it engages with an audible click.
2. Check that the battery is seated securely.
Printed: 28.08.2017 | Doc-Nr: PUB / 5265030 / 000 / 01