Operating Instruction TE 30-A36 (03)
Manuals
Brands
Hilti Manuals
Cordless Combo Kits
Three-tool cordless combos
1
2
3
4
5
6
7
8
9
10
Table Of Contents
Original operating instructions
1 Information about the documentation
1.1 About this documentation
1.2 Explanation of symbols used
1.2.1 Warnings
1.2.2 Symbols in the documentation
1.2.3 Symbols in the illustrations
1.3 Product-dependent symbols
1.3.1 Symbols on the product
1.4 Product information
1.5 Declaration of conformity
2 Safety
2.1 General power tool safety warnings
2.2 Hammer safety warnings
2.3 Additional safety instructions for breakers
3 Description
3.1 Product overview
3.2 Intended use
3.3 Possible misuse
3.4 ATC
3.5 Motor protection system
3.6 Lithium-ion battery status display
3.7 Items supplied
4 Technical data
5 Operation
5.1 Preparations at the workplace
5.1.1 Inserting the battery
5.1.2 Removing the battery
5.1.3 Charging the battery
5.1.4 Fitting the side handle
5.1.5 Adjusting the depth gauge (optional)
5.1.6 Removing the chuck
5.1.7 Fitting the chuck
5.1.8 Inserting the tool
5.1.9 Removing the accessory tool
5.2 Types of work
5.2.1 Function selector switch
5.2.2 Drilling without hammering
5.2.3 Drilling with hammering action (hammer drilling)
5.2.4 Chisel positioning
5.2.5 Chiseling
5.2.6 Forward / reverse
6 Care and maintenance
7 Transport and storage of cordless tools
8 Troubleshooting
8.1 The combihammer is in working order.
8.2 The combihammer is not in working order.
9 Disposal
10 Manufacturer’s warranty
TE
30A36
Original
operating
instructions
Printed: 30.04.2019 | Doc-Nr: PUB / 5351707 / 000 / 03
1
2
3
4
5
...
...
20
