Operating Instruction SCO 6 (01)

*2143544*
2143544 English 7
4 Consumables
The following accessory tools can be used with the cut-out tool:
Drywall
• Guidepoint bit (1/8")
• Standard bit (1/8")
• Universal guidepoint bit (5/32")
• Window/door guidepoint bit (1/4")
Metal
• Metal bit (5/32")
5 Technical data
SCO 6-A22
Rated voltage
21.6 V
Rated speed under no load
30,000 /min
Operating temperature
1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
Storage temperature
−4 ℉ … 158 ℉
(−20 ℃ … 70 ℃)
Weight
3.1 lb
(1.4 kg)
Clamping nut
5
/
8
" external hexagon
Collet diameter
1/8", 5/32", 1/4"
Cutting bit shank diameter
1/8", 5/32", 1/4"
Battery operating temperature
1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
Battery charging starting temperature
14 ℉ … 113 ℉
(−10 ℃ … 45 ℃)
Battery storage temperature
−4 ℉ … 104 ℉
(−20 ℃ … 40 ℃)
6 Operation
6.1 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
6.1.1 Inserting the battery 2
1. Push the battery into the battery holder until it engages with an audible click.
2. Check that the battery is seated securely.
6.1.2 Removing the battery 3
1. Press the release buttons on the battery.
2. Pull the battery out toward the rear.
6.1.2.1 Fitting an accessory tool 4
CAUTION
Risk of damage. The collet can break if tightened when no accessory tool is fitted.
▶ Never tighten the collet when no accessory tool is fitted.