Operating Instruction GPB 6X-A22 (01)

6 English 2241317
*2241317*
Status Meaning
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights up. Charge status: 10 % to 25 %
1 LED flashes. Charge status: < 10 %
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs flash, please refer to the information given in the
Troubleshooting section.
4 Technical data
Weight including battery B22⁄8.0
3.5 kg
(7.7 lb)
Rated voltage
21.6 V
Speed range
1,220 /min …
2,750 /min
Maximum tool diameter
4 in
Maximum tool width
100 mm
(3.9 in)
Blade holder
19 mm
(0.7 in)
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 70 ℃
(−4 ℉ … 158 ℉)
4.1 Battery
Battery operating voltage
21.6 V
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Battery charging starting temperature
−10 ℃ … 45 ℃
(14 ℉ … 113 ℉)
5 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶
Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.