Operating Instruction AG 600-A36 (02)

12 English
Application Designation Material
Wire brushes Wire brushes 3CS, 4CS, 3SS,
4SS
Metal
Suitability of discs for the equipment used
Item Equipment ACD AG-D AF-D AN-D DG-
CW
(SPX,
SP, P)
DC-TP,
DC-D
(SPX,
SP, P)
3CS,
4CS,
3SS,
4SS
AG-D
type 27
A Guard X X X X X X X —
B Front cover (in
combination with
A)
X — — — — X — —
C DG-EX 125/5" dust
hood for grinding
— — — — X  — —
D DC-EX 125/5"C dust
hood for cutting (only
in conjunction with A)
— — — —  X — —
E Side handle X X X X X X X X
F DCBG 125 hoop
handle (optional for
E)
X X X X X X X X
G Clamping nut X X X X X X — —
H Clamping flange X X X X X X — —
I
Kwik lock (optional
for G)
X X X X  X — —
J Guard type 27 — — — — — — — X
3.9 Li-ion battery charge status display
The charge status of the Liion battery is displayed after one of the two battery release buttons is pressed.
Status Meaning
4 LEDs light. • Charge status: 75 % to 100 %
3 LEDs light. • Charge status: 50 % to 75 %
2 LEDs light. • Charge status: 25 % to 50 %
1 LED lights up. • Charge status: 10 % to 25 %
1 LED blinks. • Charge status: < 10 %
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs blink, please refer to the information given in the
Troubleshooting section.
4 Technical data
4.1 Angle grinder
AG 600A36
Rated voltage
36 V
Rated speed
8,500 /min
Maximum disc diameter
6 in
Maximum disc diameter
150 mm
Weight
7.7 lb
(3.5 kg)
Drive spindle thread
5/8"-11
Printed: 07.03.2018 | Doc-Nr: PUB / 5246615 / 000 / 01