Operating Instruction AG 600-A36 (02)

English 11
3.6 Dust hood for cutting: DC-EX 125/5" C compact hood (accessory)
When cutting mineral materials with diamond cutting discs, use the DC-EX 125/5" C compact hood.
CAUTION Use of this hood for working on metal is prohibited.
3.7 DG-EX 125/5" dust hood for grinding (accessory)
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
CAUTION Use of this hood for working on metal is prohibited.
3.8 Consumables
Use only synthetic-resin-bonded, fiber-reinforced discs with a maximum Ø of 6" approved for a rotational
speed of at least 8500 rpm and a peripheral speed of 80 m/s.
The maximum grinding disc thickness is 1/4" and the maximum cutting disc thickness is 1/8".
WARNING! When cutting or slitting with abrasive cutting discs always use the standard guard with
the additional front cover, or a fully enclosing dust hood.
Discs
Application Designation Material
Abrasive cutting disc Cutting, slitting ACD Metal
Diamond cutting disc Cutting, slitting DC-TP, DC-D (SPX,
SP, P)
Mineral
Abrasive grinding disc Rough grinding AG-D, AF-D, AN-D,
AG-D type 27
Metal
Diamond grinding disc Rough grinding DG-CW (SPX, SP,
P)
Mineral
Printed: 07.03.2018 | Doc-Nr: PUB / 5246615 / 000 / 01