Operating Instruction AG 600-A36 (02)

10 English
@
Guard release button
;
Spindle lockbutton
=
Air vents
%
Release button with additional function
(charge status display activation)
&
Battery
(
Switch-on interlock release button
)
On/off switch
+
Vibration-absorbing side handle
§
Spindle
/
Standard guard
:
Clamping flange
∙
Cutting disc / grinding disc
$
Clamping nut
£
Kwik lock clamping nut (optional)
|
Wrench
3.2 Intended use
The product described is a hand-held cordless angle grinder. It is designed for cutting and grinding and
brushing metal and mineral materials without use of water. It can be used only for dry grinding / cutting.
• The tool can be used for cutting, slitting and grinding mineral materials only in combination with the
appropriate guard (optional accessory).
• It is recommended that a dust removal system consisting of matched components, i.e. dust removal
hood and a suitable Hilti vacuum cleaner, are used for working on mineral materials such as concrete or
stone. These protect the operator and increase the life of the tool and accessory tools used.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
3.4 Temperature-dependent motor protection
The temperature-dependent motor protection system monitors current input and motor temperature and
thus prevents the power tool overheating.
If the motor is overloaded through application of excessive working pressure, the power tool’s performance
drops noticeably or it may stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the tool and
then allow it to run under no load for approx. 30 seconds.
3.5 Guard with front cover
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the standard guard with front cover.
Printed: 07.03.2018 | Doc-Nr: PUB / 5246615 / 000 / 01