Operating instructions
8 English 2184329
*2184329*
3.9 Items supplied
BX 3-ME fastening tool, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
4 Technical data
4.1 Fastening tool
Weight B 22/2.6 LiIon (02)
8.4 lb
(3.8 kg)
B 22/3.0 LiIon (01)
8.6 lb
(3.9 kg)
B 22/5.2 Li-Ion (01)
9.0 lb
(4.1 kg)
Nail length (collated nails)
0.6 in … 0.9 in
(14 mm … 24 mm)
Nail length (single nails)
1.2 in … 1.4 in
(30 mm … 36 mm)
Nail diameter
0.12 in
(3.0 mm)
Magazine capacity
20 nails
Compression stroke
0.5 in
(12 mm)
Contact pressure
11 lb
f
… 16 lb
f
(50 N … 70 N)
Application temperature (ambient temperature)
5 ℉ … 122 ℉
(−15 ℃ … 50 ℃)
Recommended maximum fastening rate
650/h
Rated voltage
21.6 V
Battery operating voltage
21.6 V
4.2 Battery
Battery operating voltage
21.6 V
Ambient temperature
14 ℉ … 140 ℉
(−10 ℃ … 60 ℃)
Storage temperature
−4 ℉ … 104 ℉
(−20 ℃ … 40 ℃)
5 Preparing the tool for use
5.1 Charging the battery
1. Remove the battery. → page 9
2. Charge the battery in accordance with the information provided in the operating instructions for the
charger.
5.2 Inserting the battery 2
In order to achieve maximum battery lifetime, replace the discharged battery with a fully charged
battery as soon as there is a clearly perceptible drop in battery performance.
1. Check that the contacts on the battery and on the tool are free of foreign matter.
Printed: 19.07.2018 | Doc-Nr: PUB / 5377482 / 000 / 02